CCNA 1 v6.0 Routing and Switching ITN Chapter 6 PT Practice Skills Assessment Type 3
Topology
You will receive one of three possible topologies.
Addressing Table
Device | Interface | Address | Subnet Mask | Default Gateway |
---|---|---|---|---|
College | G0/0 | 172.16.5.1 | 255.255.255.0 | N/A |
G0/1 | 192.168.5.1 | 255.255.255.0 | N/A | |
Faculty | VLAN 1 | 172.16.5.2 | 255.255.255.0 | 172.16.5.1 |
Admin | VLAN 1 | 192.168.5.252 | 255.255.255.0 | 192.168.5.1 |
Prof X | NIC | 172.16.5.10 | 255.255.255.0 | 172.16.5.1 |
Prof Y | NIC | 172.16.5.11 | 255.255.255.0 | 172.16.5.1 |
Dean X | NIC | 192.168.5.10 | 255.255.255.0 | 192.168.5.1 |
Dean Y | NIC | 192.168.5.11 | 255.255.255.0 | 192.168.5.1 |
Objectives
• Perform basic device configuration tasks on a router and a switch
• Configure IP addressing settings on network devices
• Venfy Layer 3 connectivity and troubleshoot connectivity issues
Scenario
You are working on a network that has already been partially configured In this assessment you will complete a set of requirements by configunng some additional settings on the Faculty switch and the router. Use the knowledge that you have gained in the curnculum and labs to fulfill the requirements below
Note: If you need a value that is not given to you, you can use any value you want However, you must use the correct values for the default gateways in order that the hosts can communicate.
Requirements
• Determine the values that are missing from the Addressing Table
• Configure all devices with the missing default gateway values
• Name the Faculty switch Faculty Your configuration must match this value exactly
• Secure access to all configuration lines of the Faculty switch
• Secure access to the device configurations of the Faculty switch using the encrypted password
• Ensure that all plain text passwords on the Faculty switch are encrypted
• Configure an appropriate banner on the Faculty switch
• Configure addressing for all devices according to the Addressing Table Most values are provided in the table, others you must determine
• Document interfaces with descnptions on the College router interfaces and the Faculty switch virtual interface
• Save your configurations
• Venfy connectivity between all devices All devices should be able to ping all of the other devices
• Troubleshoot any connectivity problems
All devices should be able to ping one another when you have successfully completed the activity.
College Router Configuration
Router>enable Router#configure terminal Router(config)#hostname College College(config)#enable secret cisco College(config)#line console 0 College(config-line)#password cisco College(config-line)#login College(config-line)#exit College(config)#line vty 0 4 College(config-line)#password cisco College(config-line)#login College(config-line)#exit College(config)#line aux 0 College(config-line)#password cisco College(config-line)#login College(config-line)#exit College(config)#service password-encryption College(config)#banner motd $Authorized Personnel Only$ College(config)#interface g0/0 College(config-if)#ip address 172.16.5.1 255.255.255.0 College(config-if)#no shutdown College(config-if)#description Faculty LAN College(config-if)#exit College(config)#interface g0/1 College(config-if)#ip address 192.168.5.1 255.255.255.0 College(config-if)#no shutdown College(config-if)#description Admin LAN College(config-if)#end College#write Building configuration… [OK]
Faculty Switch Configuration
Switch>enable Switch#configure terminal Switch(config)#hostname Faculty Faculty(config)#enable secret class Faculty(config)#line console 0 Faculty(config-line)#password cisco Faculty(config-line)#login Faculty(config-line)#exit Faculty(config)#line vty 0 4 Faculty(config-line)#password cisco Faculty(config-line)#login Faculty(config-line)#exit Faculty(config)#service password-encryption Faculty(config)#banner motd $Authorized Personnel Only$ Faculty(config)#interface vlan 1 Faculty(config-if)#ip address 172.16.5.2 255.255.255.0 Faculty(config-if)#no shutdown Faculty(config-if)#description Faculty – College LAN Faculty(config-if)#exit Faculty(config)#ip default-gateway 172.16.5.1 Faculty(config)#end Faculty#write Building configuration… [OK]
Admin Switch Configuration
Switch>enable Switch#configure terminal Switch(config)#hostname Admin Admin(config)#enable secret class Admin(config)#line console 0 Admin(config-line)#password cisco Admin(config-line)#login Admin(config-line)#exit Admin(config)#line vty 0 4 Admin(config-line)#password cisco Admin(config-line)#login Admin(config-line)#exit Admin(config)#service password-encryption Admin(config)#banner motd $Authorized Personnel Only$ Admin(config)#interface vlan 1 Admin(config-if)#ip address 192.168.5.252 255.255.255.0 Admin(config-if)#no shutdown Admin(config-if)#description Admin – College LAN Admin(config-if)#exit Admin(config)#ip default-gateway 192.168.5.1 Admin(config)#end Admin#write Building configuration… [OK]
Prof X
IP Address: 172.16.5.10
Subnet Mask: 255.255.255.0
Default Gateway: 172.16.5.1
Prof Y
IP Address: 172.16.5.11
Subnet Mask: 255.255.255.0
Default Gateway: 172.16.5.1
Dean X
IP Address: 192.168.5.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.5.1
Dean Y
IP Address: 192.168.5.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.5.1